GCS100 - Gas Connector System 100
The heart of the Gas Connector System consists of 2 quick release hose fittings, one male and one female. The hose with the male fitting connects to your OCB (BOV) or a 2nd stage and the female connects to the intermediate (low) pressure port of your first stage.
When the hoses are disconnected both the male and the female ends are sealed automatically allowing easy and secure release and connection of side-mounted cylinders and allowing a change of gas supply if required.
1 x GC3 FLOWSTOP
1 x GC1/24 - 24" hose - with a female snap connector end and a standard (3/8" UNF) 1st stage end
1 x GC2/24 - 24" hose - with a male connector end and a standard (9/16" UNF female) 2nd stage end
1 x EV50/24 - AutoAir 24" hose - with a female snap connector end and a standard (3/8" UNF) 1st stage end
All hoses can be shortened by unscrewing the reusable end fittings and cutting the hose to the required length. The ends can then be re-fitted.
Longer hoses are available on request.
IMPORTANT NOTE: The AP Gas Connector System (GCS) conforms to the EN250 regulator breathing standard down to 40m. Below this depth the breathing performance falls below this standard. If the GC3 FLOWSTOP is used in-line with the GCS the system conforms to EN250 down to 30m.
Made in the UK
If you have a question about this product, drop us a line below and we'll get back to you as soon as we can.