GC1/24 - Hose with Female Snap Connector and 1st Stage End
The GC1/24 consists of a 24" hose with a reusable 3/8" UNF fitting on one end (to fit a 1st stage LP port) and a female snap connector (to connect to the male hose GC2/24) on the other.
The female snap connector is attached to the hose via a standard (9/16" UNF) 2nd stage thread connection. This allows you to remove the snap connector and to fit a GC3 FLOWSTOP in-line between the hose and the snap connector.
The female snap connector end of the GC1/24 features an automatic closure valve that prevents water entering the hose when disconnected.
NOTE: All hoses can be shortened by unscrewing the reusable end fittings and cutting the hose to the required length.
The ends can then be re-fitted.
Longer hoses are available on request.
IMPORTANT NOTE: The AP Gas Connector System (GCS) conforms to the EN250 regulator breathing standard down to 40m. Below this depth the breathing performance falls below this standard. If the GC3 FLOWSTOP is used in-line with the GCS the system conforms to EN250 down to 30m.
Made in the UK
If you have a question about this product, drop us a line below and we'll get back to you as soon as we can.