AP50C - Low Pressure Hose - per metre
1/2" x 1/4"
Max. Working Pressure: 400 psi / 28 bar
Sold per metre.
Please specify how many metres you require in the Quantity field.
Replacement Part for use with:
- all low pressure inflator hoses - with AP hose end fittings AP50A (snap connector) and AP50B (3/8"UNF First Stage end)
- this includes all inflator hoses for the AP200 valve series - i.e. the pre 2007 (AP200 AP Valve) and post 2007 (APV200 AP Valve)
- and all inflator hoses for the APV300 valve (as featured on the AP Travelwing and AP Commando Escape BCDs)
- and all inflator hoses for the Auto Air valves - pre 2007 (AP100) and post 2007 (APV100) BUT ONLY if the hose end fittings used are: the post 2009 design EV50B (snap connector end) and the standard inflator hose 3/8"UNF fitting (first stage end) - the AP50B. See note below.
IMPORTANT NOTE - RE: AUTO AIR USE
YOU MUST NOT USE the AP50C hose with the pre 2009 Auto Air Hose fittings - the AP150B Snap Connector and the AP150C 3/"UNF First Stage End.
These parts are obsolete as they were made for a wider hose, itself now obsolete. If you try to fit these parts to the AP50C hose they WILL NOT BE A SECURE FIT.
The AP50C hose can be used with the Auto Air valve providing you fit the current post 2009 end fittings - the EV50B Snap Connector and the AP50B 3/8"UNF First Stage End.
See below to identify whether you have the correct end fittings for the AP50C hose.
Made in the UK
If you have a question about this product, drop us a line below and we'll get back to you as soon as we can.