AP BCD Dump Valve Spanner

SKU
APTOOL1
£11.35 £9.46

APTOOL1 - Dump Valve Spanner for pre-2007 AP / BUDDY BCDs & Wings

For use with:

pre-2007 AP BCD & Wing AP5 Dump Valves, AP31 Dumping Elbow and AP30 Swivel Elbow current AP Rebreather Wing AP5 Dump Valves and AP31 Dumping Elbow

The end of the handle is also designed as a useful tool for pushing d
Read More

APTOOL1 - Dump Valve Spanner for pre-2007 AP / BUDDY BCDs & Wings

For use with:

  • pre-2007 AP BCD & Wing AP5 Dump Valves, AP31 Dumping Elbow and AP30 Swivel Elbow
  • current AP Rebreather Wing AP5 Dump Valves and AP31 Dumping Elbow

The end of the handle is also designed as a useful tool for pushing down the inner bladder and outer bag material to the bottom of the thread of the dump valve base before screwing down the outer part of the valve. It is important to do this to prevent material from getting caught in the thread and ensure a good seal.

TIP: The photo above shows the correct positioning of the spanner when tightening clockwise. If you were to position the spanner like this when un-tightening the valve (anti-clockwise) the jaws may be prised apart potentially causing it to slip off. The solution is to flip the spanner over so that the main turning force is from the handle end of the spanner.

[N.B. This C-spanner is a different size to the RBTOOL5 AP rebeather Dump Valve Spanner or the RBTOOL6 AP rebreather T-Piece Spanner]

Fast Delivery

Premium Support

Made in the UK

Secure Checkout